Clock format, Touch tones – Nokia 6305i User Manual
Page 50
S e t t i n g s a n d t o o l s
49
•
Digit Dialing
—Adapt digit dialing to your voice. Select
Adapt Digits
to improve
voice recognition of phone numbers. Adaptation takes about 60 seconds.
Select
Reset Digits
to erase any digit adaptation you have done and reset digit
dialing to the factory default. If you have not adapted digits, this option is
grayed out.
•
Sound
—Customize the settings for playback of names, name settings, and
numbers. Select
Prompts
,
Digits
, or
Names
to turn their associated playback
on or off. Select
Name Settings
>
Speed
>
Faster
or
Slower
to change the
speed of name playback. Select
Name Settings
>
Volume
>
Louder
or
Softer
to
change the volume of name playback.
•
About
—View information about the voice services software. Go to
information.
Adapt Digits
—Use your voice to enable voice services to recognize how you
pronounce numbers. At the prompt, repeat the series of numbers displayed. This
process takes approximately 60 seconds. You should be in a quiet room when you
set this option. See "Speaker phone," p. 14.
This option is also available in
Voice Services
through the
Voice Services
>
Digit
Dialing
>
Adapt Digits
menu.
Voice Memo
—Create a recorded memo. The recorded memo can be inserted as
sound in a message, or used as a ringtone or alert. See "Sounds," p. 43.
Touch tones
Touch tones, or DTMF tones, are the tones that sound when you press the keys on your
device keypad. You can use touch tones for many automated dial-up services such as
banking and airlines, or for entering your voice mailbox number and password.
To set the key tone length and touch tone playback speed, select
Menu
>
Settings
& Tools
>
Call Settings
>
DTMF Tones
. Select
Normal
to send out a tone for a fixed
period of time no matter how long you press the key or
Long
to send out a
continuous tone for as long as you keep the key pressed.
■ Clock format
To choose the type of clock to display on the standby screen, select
Menu
>
Settings & Tools
>
Clock Format
>
Digital
or
Analog
. Select
Off
if you want the
clock display feature turned off.