Nokia 6126 - Manual (Page 22)

C a l l f u n c t i o n s
21
1. In the standby mode, press and hold the right selection key, or press and hold
the volume down key. A short tone sounds, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold
the headset key to start the voice dialing.
2. Say the voice command clearly. If voice recognition is successful, a list with
matches is displayed. The phone plays the voice command of the match on the
top of the list. After about 1.5 seconds, the phone dials the number; or if the
result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar
to voice dialing. See Voice commands in "My shortcuts," p. 40.
■ Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end the call,
press the end key, or close the phone.
To decline an incoming call if the phone is open, press the end key. To decline
an incoming call when the phone is closed, press and hold a volume key.
To mute the ringing tone, press a volume key when the phone is closed, or select
Silence when the phone is open.
If the Forward if busy function is activated to forward the calls (for example, to your
voice mailbox), declining an incoming call also forwards the call. See "Call," p. 45.
If a compatible headset (supplied with the headset key) is connected to the phone,
to answer and end a call, press the headset key.
Call waiting
To answer the waiting call during an active call, press the call key. The first call
is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see "Call," p. 45.