Nokia DT-900 - Manual (Page 4)

Switch on
1 Connect one end of the charger cable to the power supply.
2 Plug the power supply into a wall outlet.
3 Connect the other end of the cable to the charging plate.
You can keep the plate plugged into the wall outlet even when you're not charging
your phone. The plate uses hardly any power when not charging.
Switch off
Disconnect the power supply from the plate, then unplug from the wall outlet.
Charge your device
1 Make sure that there's nothing on the charging plate.
2 Place your phone or other compatible device on the charging plate. When the
white indicator light goes off, the battery is fully charged.
It's normal for the plate and phone to get warm, and they may get even warmer if you
use your phone to, for example, stream music while charging.
Keep the area around the plate free. If there is something on the plate besides your
phone, the phone doesn't charge, and the white indicator light blinks quickly.
4