Nokia 6265i - Manual (Page 76)

S e t t i n g s
75
2. Select a function option you wish to tag, and select Add .
3. Select Start , and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag. appears next to the function
option for which you add a voice tag.
Activate a voice command
After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names .
2. When Speak now appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice command tag, Found: appears, and the phone
plays the recognized voice command tag through the earpiece. The function you
requested is activated.
Voice command options
You can modify voice command tags. In the standby mode, select Menu > Settings >
Voice commands , highlight the voice command tag, and select one of the
following options:
Play —Listen to the voice command tag.
Options > Change —Change the voice command tag.
Options > Delete —Erase the voice command tag.
■ Connectivity
You can connect the phone to a compatible device using an IR connection.
You can also connect the phone to a compatible PC using IR or a USB data cable;
and use the phone as a modem to enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and
all related software can be downloaded from the U.S. Mobile Phone products
section of www.nokiausa.com/pcsuite.
Important: Only install and use applications and other software
from sources that offer adequate security and protection against
harmful software.