Security settings, Phone and sim, Se ttings – Nokia N82 User Manual

Page 142

Advertising
background image

is set to

Beep once

or

Silent

, automatic answer

is disabled.

●

Lights

— Set whether lights remain on or are

switched off after the time-out. This setting is not

available for all enhancements.

TV-out settings

To change the settings for a TV-out connection,

select

TV-Out

and from the following:

●

Default profile

— Set the profile that you want

activated each time you connect a Nokia Video

Connectivity Cable to your device.

●

TV screen size

— Select the aspect ratio of the

TV:

Normal

or

Widescreen

for widescreen TVs.

●

TV system

— Select the analogue video signal

system that is compatible with your TV.

●

Flicker filter

— To improve image quality on the

screen of your TV, select

On

. The flicker filter may

not diminish image flicker on all TV screens.

Security settings

Phone and SIM

Press , and select

Tools

>

Settings

>

General

>

Security

>

Phone and SIM card

.

●

PIN code request

— When active, the code is

requested each time the device is switched on.

Deactivating the PIN code request may not be

allowed by some SIM cards.

●

PIN code

,

PIN2 code

, and

Lock code

— You can

change the lock code, PIN code, and PIN2 code.

These codes can only include the numbers from

0 to 9.
If you forget the PIN or the PIN2 code, contact

your service provider. If you forget the lock code,

contact a Nokia Care point or your service

provider.

See "Access codes", p. 16.

Avoid using access codes similar to the

emergency numbers to prevent accidental

dialling of the emergency number.

●

Keypad autolock period

— Select whether the

keypad is locked when your device has been idle

for a certain period of time.

Tip: To lock or unlock the keypad manually,

press the left selection key, then *.

●

Phone autolock period

— To avoid

unauthorised use, you can set a time-out after

which the device automatically locks. A locked

device cannot be used until the correct lock code

is entered. To turn off the autolock period, select

None

.

Tip: To lock the device manually, press the

power key. A list of commands opens.

Select

Lock phone

.

●

Lock if SIM card changed

— You can set the

device to ask for the lock code when an unknown

SIM card is inserted into your device. The device

142

Se

ttings

Advertising