Nokia Car Kit CK-300 - Manual (Page 14)

G e t s t a r t e d
14
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
Set up a connection with your mobile device
For a Bluetooth connection, you need a compatible mobile device that
supports Bluetooth wireless technology. When your device is connected
to the car kit using Bluetooth wireless technology, you can keep it, for
example, in a bag, while using the car kit. To charge the battery in your
compatible Nokia device while using the car kit, connect the device
through the supplied connectivity cable to the car kit.
To pair and connect your device to the car kit, do as follows:
1. Switch on the device and the car kit (see p. 12).
2. Activate the Bluetooth feature on your device, and set the device to
search for Bluetooth devices. See the user guide of your device for
instructions.
3. Select the car kit from the list of found devices.
4. Enter the Bluetooth passcode 0000 to pair and connect the car kit to
your device. In some devices you may need to make the connection
separately after pairing. See the user guide of your device for details.
You only need to pair the car kit with your device once.
If the pairing is successful, the car kit sounds a high beep and appears in
the menu of your mobile device where you can view the currently paired
Bluetooth devices. If the pairing fails, the car kit sounds a low beep. Try
to pair again by carefully following the pairing instructions.
You can pair the car kit with up to eight mobile devices in total but
connect it to only one mobile device at a time.
The car kit can connect to a paired device only if the device is switched
on and has the Bluetooth feature activated.
Connect the car kit manually
When you switch on the car kit but have not connected a device to it,
you can set the car kit to search for paired devices.
To start the search, press and hold the Navi wheel for about 1 second.
During the search, the indicator light of the input device flashes. The car
kit first tries to connect to the device that was used with it most