Nokia 6682 - Manual (Page 104)

Tools
95
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
A roaming agreement is an agreement between two or
more network service providers to enable the users of one
service provider to use the services of other service providers.
Cell info display —Select On to set the phone to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in the standby mode are as follows:
A headset, music stand, or Bluetooth wireless
technology device is connected.
A loopset is connected.
A TTY adapter is connected.
A car kit is connected.
The headset is unavailable, or a Bluetooth
connection to a headset is lost.
Select Headset , Car kit , Bluetooth handsfree , Loopset , or
TTY and the following options are available:
Default profile —To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See "Set tones," p. 22.
Automatic answer —To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to
Beep once or Silent , automatic answer is
disabled. Automatic answer is not available for TTY.
If you are using a TTY adapter, you must activate it on your
phone by selecting
Tools > Settings > Enhancement
settings > Enhancement in use > TTY .
Voice commands
You can use voice commands to add, delete, and control
your phone. You record voice commands in the same way
as voice tags. See "Add a voice tag," p. 28.
Select Menu > Tools > Voice com.
Add a voice command to an
application
You can have only one voice command per application.
1 Select the application to which you want to add a
voice command.
To add a new application to the list, select Options >
New application .
2 Select Options > Add voice command . See "Add a
voice tag," p. 28.