Nokia 500 Auto Navigation - Manual (Page 5)

5
■ Install the device in a car
Attach the mobile holder to the mounting device using the supplied screw (1), and
snap the protection plate into place. To attach the mounting device to the
windscreen, carefully push the locking lever toward the cup (2). Insert the
navigation device into the mobile holder (3), and press the device backwards so
that the two arms of the holder lock the device in place (4). (To release the device,
push the arms.) To adjust the vertical or horizontal position, use the screws (5) and
(6).
To charge the internal battery, connect the supplied charger to the mini USB port
on the navigation device, and insert the charger plug into the 12 V cigarette
lighter socket of your car.
To use the TMC (traffic message channel) service with the device, keep the charger
connected to the device as the charger includes the TMC antenna.
■ Basic operation
Touch screen
To use most features of the device, tap the screen with your finger.
2
3
1
4
5
6