Clear the settings or reset the headset, Battery information – Nokia Wireless Headset HS-26W User Manual

Page 7

Advertising
background image

ENGLISH

answer/end key twice briefly when no
call is in progress.

If your phone supports voice dialing
with the headset, press and hold the
answer/end key when no call is in
progress, and proceed as described in
the user guide of your phone.

To answer or end a call, press the
answer/end key. To reject a call, briefly
press the answer/end key twice.

To adjust the earphone volume, press
the volume key up or down.

To mute or unmute the microphone
during a call, briefly press the middle
of the volume key.

To switch the call between the
headset and a compatible phone,
press and hold the answer/end key.

Clear the settings or reset the

headset

To clear all the settings from the
headset, press and hold the power key
and the volume key up for 10 seconds.

To reset the headset if it stops
functioning, although it is charged,
plug the headset into a charger, and
briefly press the power key and the
middle part of the volume key.

Battery information

Your headset is powered by a
rechargeable battery. The battery can be
charged and discharged hundreds of
times, but it will eventually wear out.
Recharge your battery only with Nokia

approved chargers designated for this
headset.

Unplug the charger from the electrical
plug and the headset when not in use. Do
not leave a fully charged battery

Advertising