Touch tones – Nokia 2125i User Manual
Page 42

S e t t i n g s
41
1. In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Automatic
keyguard
>
On
or
Off
.
2. If you select
On
,
Set delay:
is displayed.
3. Enter the delay (in minutes and seconds), and select
OK
.
Important: When keyguard is on, calls may be possible to the emergency
number programed into your phone. Enter the emergency number, and
press the call key. The number is displayed only after you enter the last digit.
Touch tones
Touch tones sound when you press the keys on your phone keypad. You can use
touch tones for many automated dial-up services such as banking and airlines, or
for entering your voice mailbox number and password.
Touch tones are sent during an active call and can be sent manually from your
phone keypad, or sent automatically by saving them in your phone.
Set type
In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Touch tones
>
Manual touch tones
, and one of the following options:
Continuous
—Sets tone sounds for as long as you press and hold a key
Fixed
—Sends tones of the duration you specify in the
Touch tone length
option
Off
—Turns off tones. No tones are sent when you press a key
Set length
To specify touch tone length when using the
Fixed
option, in the standby mode,
select
Menu
>
Settings
>
Phone settings
>
Touch tones
>
Touch tone length
>
Short
(95 milliseconds) or
Long
(350 milliseconds).
Welcome note
You can write a welcome note that is briefly displayed whenever you switch your
phone on. Predictive text input is not available for entering welcome note text
1. In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Welcome note
.
2. Enter a note (up to 44 characters).
Press * to display and select from the available special characters.
3. When you are finished, select
Options
>
Save
to save the welcome note or
Delete
to delete the previous text and create another welcome note.