Nokia Holder Easy Mount HH-12 - Manual (Page 4)

ENGLISH
disturb your field of vision while
driving.
Check that the deployment of the
airbag is not blocked or impaired in
any way.
Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction cup
at the bottom of the mounting device
is firmly attached to the windscreen,
especially if the ambient temperature
changes a lot.
Never leave the mounting device
inside the vehicle in direct sunlight or
in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
Attach to a windscreen
Locate a safe mounting surface on the
windscreen, and clean the surface
thoroughly with a glass cleaner and a
clean towel. If the ambient
temperature is below +15°C (60°F),
carefully warm the surface and the
suction cup with a hair dryer to ensure
a firm grip on the windscreen. Ensure that you do not heat the windscreen
excessively to avoid damage to it.
Press the suction cup at the bottom of
the mounting device firmly on the
windscreen (see step 1 at the start of
this guide), and carefully push the
locking lever inside the mounting
device (2) towards the suction cup to
create a vacuum between the suction