Nokia E5-00 - Manual (Page 46)

To change the password used for restricting voice, fax, and data calls, select
Options > Edit restriction passwd. . Enter the current code, then the new code
twice. The restriction password must be four digits long. For details, contact your
service provider.
Voice dialing
Your device supports enhanced voice commands. Enhanced voice commands are
not dependent on the speaker’s voice, so you do not need to record voice tags in
advance. The device creates a voice tag for the entries in the contacts, and compares
the spoken voice tag to it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name that is saved for the contact.
To listen to the synthesized voice tag, select a contact and Options > View
details > Options > Voice tag details > Options > Play voice tag .
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
Make a call with a voice tag
When you use voice dialing, the loudspeaker is in use. Hold the device at a short
distance away when you say the voice tag.
1 To start voice dialing, in the home screen, press and hold the right selection
key. If a compatible headset with the headset key is attached, press and hold
the headset key to start voice dialing.
2 A short tone sounds, and Speak now is displayed. Say clearly the name that is
saved for the contact.
3 The device plays a synthesized voice tag for the recognized contact, and displays
the name and number. If you do not want to call that contact, select another
contact from the list of matches within 2.5 seconds, or, to cancel, select Quit .
46 Make calls