Nokia Car Kit CK-100 - Manual (Page 23)

I n s t a l l a t i o n
23
1. Connect the respective wires of the power cable PCU-4 to the car
battery and ignition sense (if available). Connect the car radio mute
wire (if available) to the car radio.
2. Plug the power cable to the respective connector on the
hands-free unit.
3. Connect the loudspeaker SP-3 to the respective connector on the
hands-free unit.
4. Connect the stereo outputs of the hands-free unit to the AUX input
of the car radio. Use an appropriate cable specific to your car radio
(this cable is not supplied with the car kit).
After you have made all the connections, connect the external input
device CU-11 and the microphone MP-2 to the respective connectors on
the hands-free unit.
To charge a compatible Nokia mobile phone through the car kit, connect
one end of the charging cable CA-134 to the hands-free unit and the other
end to the 2.0-mm (0.08 inch) charging connector of the mobile phone.
■ Install the car kit in a vehicle
This section describes how to install the car kit parts in a vehicle.
The parts are explained in “Parts,” p. 6.
When installing the parts of the car kit, ensure that none of them
interfere with or hinder the steering or braking systems or other controls
or systems used in the operation of the vehicle (for example, airbags).
Example of appropriate installation