Nokia 3285 - Manual (Page 43)

11
[ 34 ]
• USE NETWORK FEATURE CODES
Call forwarding, Call waiting, and Send own caller ID with next call are
network services available through your service provider. When you subscribe
to these services, your service provider gives you a feature code that you
store in your phone to activate the service. Your service provider may have
stored feature codes in your phone. A separate deactivation code is used
to deactivate the service.
The network service name will not appear in the menu until you store the
activation code. After you store the activation and deactivation codes, you
can use the menu to activate and deactivate the service.
Note: If your phone has more than one phone number programmed into
the NAM, stored feature codes apply only to your primary phone
number, or NAM 1.
Store network feature codes
1 Press Menu 4 > 4 > 5 (Settings > Network services > Network
feature setting).
2 Enter the feature code (for example, ), and press OK.
3 Scroll to the service name for that code, and press Select.
For example, enter the call forwarding feature code, scroll until the
call forwarding option you want to select appears, then press Select.
Activate network features
Note: Before you can activate a network feature, you must store the
appropriate feature code in your phone.
1 Use the appropriate menu shortcut for the feature you want to activate
(Settings > Network services > feature name):
• Call forwarding - Menu 4 > 4 > 2
• Call waiting - Menu 4 > 4 > 3
• Caller ID - Menu 4 > 4 > 4
2 Scroll to Activate, and press OK.