Access points, Settings – Nokia 3660 User Manual
Page 34
Copyright © 2003 Nokia. All rights reserved.
Settings
34
•
Use default settings
to use the default settings. Make the needed changes and press
Back
to save the settings.
•
Use existing settings
to use existing setting information as the basis for the new access
point settings. A list of existing access points is opened. Select one and press
OK
.
Access point settings are opened with some fields already filled.
Editing an access point
When you open Access points, the list of already available access points opens, see Fig.
, p.
. Scroll to the access point you want to edit, and press
.
Deleting an access point
In the list of access points, scroll to the access point you want to remove and select
Options
→
Delete
.
Access points
Options when editing
access point settings:
Change
,
Advanced settings
,
Help
, and
Exit
.
Here you can see a short explanation for every setting that may be needed for different
data connections and access points.
Note: Start to fill in the settings from the top because depending on what data
connection you select (
Data bearer
) or whether you need to insert a
Gateway IP
address
, only certain setting fields are available.
Note: Follow the instructions given to you by your service provider very carefully.
•
Connection name
- Give a descriptive name for the connection.
•
Data bearer
- The options are
GSM data
,
High speed GSM
, and
GPRS
. Depending on what
data connection you select, only certain setting fields are available. Fill in all fields
marked with
Must be defined
or with a red asterisk. Other fields can be left empty,
unless you have been instructed otherwise by your service provider.
Fig. 3 A list of access
points using different
data connections.