Nokia Wireless Headset HS-36W - Manual (Page 8)

G e t s t a r t e d
8
3. When the battery is fully charged, the blue indicator light switches off.
Disconnect the charger from the headset and the wall outlet. When you
disconnect the power cord of the charger, grasp and pull the plug, not the cord.
The fully charged battery has power for up to 6 hours of talk time or up to
110 hours of standby time. (In the standby mode, the headset is switched on
but no call is in progress.)
When the battery is running out of power, the red indicator light comes on.
Charge the battery.
■ Switch the headset on or off
To switch the headset on, press the answer-end key for about 1 second.
To switch it off, press and hold the answer-end key for about 5 seconds.
■ Pair the headset with a compatible phone
Make sure that the headset is on. To put it in pairing mode, press the answer-
end key and the volume up (+) key at the same time for 5 seconds until the blue
indicator lights up. The indicator light remains on for 5 minutes, during which
time you can pair the headset with a compatible mobile phone.
1. Set the phone to search for Bluetooth devices. See the user guide of your
phone for instructions.
2. When your phone finds the headset, confirm the pairing from your phone.
3. When prompted for the Bluetooth passcode of the headset, enter 0000.
If the pairing was unsuccessful, try to pair the devices again.
You need to pair the headset with your phone only once.
If the pairing was successful, the blue indicator light starts to flash.
The headset is now in the standby mode and ready for use.