Nokia 6282 - Manual (Page 70)

S e t t i n g s
69
Synchronize from a server
To use a remote Internet server, you must subscribe to a synchronization
service. For more information and the settings required for this service,
contact your service provider. You may receive the settings as a
configuration message. See “Configuration settings service,” p. 10 and
“Configuration,” p. 71.
If you have saved data on the remote Internet server, to synchronize
your phone, start the synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server
synchronization . Depending on the settings, select Initializing
synchronization or Initializing copy .
Synchronizing for the first time or after an interrupted synchronization
may take up to 30 minutes to complete, if the address book or calendar
are full.
USB data cable
You can use the USB data cable to transfer data between the memory
card inserted in the phone and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing,
connect the USB data cable; when the phone displays
USB data cable
connected. Select mode. , select OK . Select from the following modes:
Default mode —to use the cable for PC Suite
Printing —to print pictures directly from the phone using a
compatible printer
Data storage —to activate the memory card for data transfer
To change the USB mode, select Menu > Settings > Connectivity >
USB data cable > Default mode , Printing , or Data storage .
■ Call
Select Menu > Settings > Call settings and from the following options:
Call forwarding —to forward your incoming calls (network service).
You may not be able to forward your calls if some call restricting
functions are active. See
Call restrictions in “Security,” p. 72.