Packet data settings, Wireless lan settings, Se ttings – Nokia N78 User Manual

Page 154

Advertising
background image

(EAP) plug-in, or

Pre-shared key

to use a password.

Complete the appropriate settings:

EAP plug-in settings

— Enter the settings as

your service provider instructs.

Pre-shared key

— Enter a password. The same

password must be entered on the WLAN access

point device.

WPA2 only mode

— Only WPA2 enabled devices

are allowed to establish a connection in this mode.

Advanced WLAN settings

Select

Options

>

Advanced settings

and from the

following:

IPv4 settings

— Enter the IP address of your device,

the subnet IP address, the default gateway, and the

IP addresses of the primary and secondary DNS

servers. Contact your internet service provider for

these addresses.

IPv6 settings

— Define the type of DNS address.

Ad-hoc channel

(only for

Ad-hoc

) — To enter a

channel number (1-11) manually, select

User

defined

.

Proxy server address

— Enter the address for the

proxy server.

Proxy port number

— Enter the proxy port

number.

Packet data settings

Press

, and select

Tools

>

Settings

>

Connection

>

Packet data

.

The packet data settings affect all access points using

a packet data connection.

Packet data connection

— If you select

When

available

and you are in a network that supports

packet data, the device registers to the packet data

network. Starting an active packet data connection

(for example, to send and receive e-mail) is quicker.

If there is no packet data coverage, the device

periodically tries to establish a packet data

connection. If you select

When needed

, the device

uses a packet data connection only if you start an

application or action that needs it.

Access point

— The access point name is needed

to use your device as a packet data modem to a

compatible computer.

High speed packet access

— Enable or disable the

use of HSDPA (network service) in UMTS networks.

Wireless LAN settings

Press

, and select

Tools

>

Settings

>

Connection

>

Wireless LAN

.

Show WLAN availability

— Select whether is

displayed in the standby mode when a wireless LAN

is available.

154

Se

ttings

Advertising