Nokia N73 - Manual (Page 42)

Me
dia a
ppli
cations
41
The access points may be configured when you first start
your device.
Contact your service provider for more information.
In RealPlayer , you can only open an rtsp:// URL address.
However, RealPlayer recognizes an http link to a .ram file.
To stream content over the air, select a streaming link saved
in
Gallery , on a Web page, or received in a text message or
multimedia message. Before live content begins streaming,
your device connects to the site and starts loading the
content. The content is not saved in your device.
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See "Data and settings," p. 52. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video —to adjust the contrast of the video, or to have
RealPlayer automatically repeat video clips after they
finish playing.
Connection —to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy settings
Use proxy —To use a proxy server, select Yes .
Proxy serv. address —Enter the IP address of the proxy server.
Proxy port number —Enter the port number of the
proxy server.
Glossary: Proxy servers are intermediate servers
between media servers and their users. Some service
providers use them to provide additional security
or speed up access to browser pages that contain
sound or video clips.
Network settings
1 Default access point —Scroll to the access point you
want to use to connect to the Internet, and press .
2 Online time —Set the time for RealPlayer to disconnect
from the network when you pause a media clip playing
through a network link. Select
User defined , and press
. Enter the time, and select OK .
Lowest UDP port —Enter the lowest port number of the
server’s port range. The minimum value is 1024.
Highest UDP port —Enter the highest port number of the
server’s port range. The maximum value is 65535.
Select Options > Advanced settings to edit the bandwidth
values for different networks.