Charge the battery – Nokia Wireless GPS Module LD-3W User Manual

Page 9

Advertising
background image

9

G e t s t a r t e d

Charge the battery

1.

Plug the charger into its connector on the GPS module.

2.

Connect the charger to a power outlet. During charging, the green
or red indicator light blinks, depending on whether the GPS module
is on (green) or off (red).
When the battery is fully charged and the power is on, the green
light is displayed continuously. When the battery is fully charged
and the power is off, the red light stops to blink.

3.

Disconnect the charger from the power outlet and the GPS module.
When the battery is running out of power, the red indicator light on
the GPS module starts to blink every 15 seconds. Recharge the battery.

Advertising