Nokia MD-100W - Manual (Page 6)

11 Power key
12 Connector for power supply
13 Service connector
14 Audio connector (3.5 mm)
Switch the speaker on
1 Connect the power supply cable to the connector on the speaker.
2 Connect a suitable plug to the AC-adapter of the power supply.
3 Plug the power supply into a wall outlet.
4 Press the power key.
If you've never paired your speaker with a device, or you've cleared the pairings, the
speaker goes into pairing mode automatically when it is switched on, and the
Bluetooth indicator light starts to flash slowly.
If you've already paired the speaker with one or more devices, the speaker connects
to the last device it was used with.
If the speaker is not connected to another device, or has no audio connection or other
activity for 30 minutes, it switches to standby mode, and all the indicator lights switch
off.
Pair your device
Pair and connect
Before using your speaker with a phone or other compatible device for the first time,
you must pair and connect it to the device.
You can only connect the speaker to one device at a time, but you can connect to
another device on the go.
6