Nokia 3620 - Manual (Page 116)

[ 107 ]
Profiles
2 Scroll to the setting you want to change and press to open the
following choices:
• Ringing tone —To set the ringing tone for voice calls, choose a
ringing tone from the list. When you scroll through the list, you
can stop on a tone to listen to it before you make your selection.
Press any key to stop the sound. If a memory card is used, tones
stored on it have the
icon next to the tone name. Ringing
tones use shared memory. See “Shared memory” on p. 20.
Note: You can change ringing tones in two places: Profiles
or Contacts. See “Add a ringing tone for a contact card
or group” on p. 56.
• Ringing options —When Ascending is selected, the ringing
volume starts from level one and increases level by level to
the set volume level.
• Ringing volume —To set the volume level for the ringing and
message alert tones.
• Message alert tone —To set the tone for messages.
• Vibrating alert —To set the phone to vibrate at incoming voice
calls and messages.
• Keypad tones —To set the volume level for keypad tones.
• Warning tones —The phone sounds a warning tone, for example,
when the battery is running out of power.
• Alert for —To set the phone to ring only upon calls from phone
numbers that belong to a selected contact group. Phone calls
coming from people outside the selected group will have a silent
alert. The choices are
All calls / (list of contact groups, if you have
created them). See “Create contact groups” on p. 57.
• Profile name —You can rename a profile with any name you want.
The Normal profile cannot be renamed.