Nokia 6560 - Manual (Page 53)

Nokia 6560 User Guide 45 Copyright © 2003 Nokia
Advanced calling features
Add a voice tag for the command
1 Select Voice > Voice commands.
2 Scroll to the phone function you wish to tag, and press Select.
3 Select Options > Add command > Start.
Speak the voice tag clearly into the microphone, or press Quit to cancel
the recording.
The phone replays then saves the recorded tag. The icon appears next to
commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue
a command by speaking the voice tag. There are two ways to activate a
voice command:
1 If you have the optional headset attached, press and hold the headset button.
OR
Press and hold the Right selection key.
2 When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the command is issued.
Voice command tag options
After you have associated a voice tag to a command, you can choose one of the
following options:
• Listen to the tag (playback)
• Change the tag
• Delete the tag
• CALLER ID
With each call you place, you can determine whether your telephone number
appears to the person you are calling.
In most service areas, when you call others, your name is presented to their caller
ID (if they subscribe). With Send my caller identity, you can block the display of
your number when you make a call.
Note: This feature is available only when supported by the wireless
network and may not function if you are roaming. This feature works
on a call-by-call basis. You must enable this feature each time you want
to block the sending of your own number to the recipient’s caller ID.