Nokia DC-18 - Manual (Page 3)

Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it before you
can use your device.
You can use any Nokia micro-USB charger (sold separately) or a compatible USB cable to charge your
device.
1. Plug the charger into a wall outlet, or connect your device to a compatible computer with a USB
cable.
2. Connect the micro-USB end of the cable to the charger connector on your device. The indicator
lights blink while the battery is charging. When the battery is fully charged, the indicator lights switch
off.
3. When the battery is full, disconnect the charger from your device, then from the wall outlet.
© 2014 Microsoft Mobile. All rights reserved. 3