Brother DCP-117C - Manual (Page 14)

Installing the Driver & Software
12
STEP2
Windows
®
USB
Windows
®
1
For USB Interface Users
(For Windows
®
98/98SE/Me/2000 Professional/XP)
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
Note
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no media cards put into the
media drive of the machine.
1
Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2
Turn on your PC.
(For Windows
®
2000 Professional/XP, you
must be logged on with Administrator rights.)
3
Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
4
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Note
• If this window does not appear, use Windows
®
Explorer to run the setup.exe program from the
root folder of the Brother CD-ROM.
• If you are using Windows
®
2000 Professional:
To access the PhotoCapture Center™ features
from your computer you may have to install a
Windows
®
2000 update first.
The Windows ® 2000 update is included with the
MFL-Pro Suite installer.
To install the update, follow the steps below:
1 Click OK to start installation of the Windows
®
updates.
2 When instructed, click OK to restart your
computer.
3 After the computer restarts, the installation of
MFL-Pro Suite will automatically continue.
If the installation does not continue automatically,
open the main menu again by ejecting and then
reinserting the CD-ROM disc or double-click the
setup.exe program from the root folder, and
continue from Step
4 to install the MFL-Pro Suite.
5
After reading and accepting the ScanSoft
®
PaperPort ® 9.0SE License Agreement, click
Yes.