Clear pairings, Troubleshooting, Battery and charger information – Nokia BH-217 User Manual

Page 12

Advertising
background image

ENGLISH

and press and hold the multifunction
key again for about 2 seconds.

When you activate the prompts, the
green indicator light flashes once.
When you deactivate the prompts, the
yellow light flashes once. In both
cases, there is also an audible
notification.

Clear pairings

To clear the pairings from the headset,
switch off the headset, and press and

hold the multifunction key for about 8
seconds. The headset beeps twice, the
red and green indicator lights
alternate, and the headset enters
pairing mode.

Troubleshooting

If you cannot connect the headset to
your compatible device, make sure the
headset is charged, switched on, and
paired with the device.

Battery and charger information

This device has an internal,
nonremovable, rechargeable battery. Do
not attempt to remove the battery from
the device as you may damage the
device. This device is intended for use
when supplied with power from the
following chargers: AC-3, AC-4, AC-5,
AC-8, DC-4 and DC-9. The exact charger
model number may vary depending on

the type of plug. The plug variant is
identified by one of the following: E, X,
AR, U, A, C, K, or B. The battery can be
charged and discharged hundreds of
times, but it will eventually wear out.

Talk and standby times are estimates
only. Actual times are affected by, for
example, device settings, features being
used, battery condition, and temperature.

Advertising