Buffalo Technology LinkStation LS-LGL - Manual (Page 13)

1
If you don’t know your LinkStation’s IP address, there are
several ways to get it.
One simple method is to use the NAS Navigator client utility
(included on your CD) to find your LinkStation(s). Just click
on the tab for your LinkStation and you’ll be able to read its IP
address. See page 16 for more on NAS Navigator.
The LS-LGLSettings.txt file on your desktop contains the IP
address of the linkstation at the time the setup program was
run.
You can always get the LinkStation’s IP address from your
router’s configuration utility. Many Buffalo routers list this
information on the Client Monitor page, as shown to the right.
Consult your router’s documentation for instructions on
identifying the LinkStation’s IP address.
Accessing LinkStation Data from a Mac