Buffalo Technology HD-HLAN - Manual (Page 4)


Insert the LinkNavigator
CD into a PC’s CD-ROM
drive. Depending on
the PC’s configuration,
the EasySetup program
may launch. If it does
not automatically launch,
manually launch it by
pressing the ‘ Start ’ menu
and selecting the ‘ Run... ’ option. When the ‘Run’ dialog opens, type
“x:\easysetup.exe” (where X is the drive letter of the CD-ROM drive).
Press ‘ OK ’ to continue.
The IP Configuration Utility allows
you to easily configure LinkStation’s
network settings. The ‘ Search ’
button will re-scan the network
for all available LinkStations. The
drop down menu lists all available
LinkStations. If there are multiple
LinkStations on the network, then
select the proper LinkStation from
the drop down menu. Once the
proper LinkStation has been selected from the drop down menu,
press the ‘ Change IP Address ’ button.
Link Navigator is now running.
Please press the ‘ Install IP
Setup Utility ’ button, then press
the ‘ Start ’ button.
The LinkStation IP Address
Configuration Utility will launch
and begin scanning for all
available LinkStation devices on
the network.
Step : LinkNavigator Software