Brother IntelliFax-2820 - Manual (Page 45)

3 - 1
3
How to enter Fax mode
Before sending faxes or changing fax send or
receiving settings, make sure (Fax) is
illuminated in green. If it is not, press
(Fax) to enter Fax mode. The default setting
is Fax mode.
How to dial
You can dial in any of the following ways.
Manual dialing
Press all of the digits of the phone or fax
number.
One-Touch Dialing
Press the One-Touch key of the location you
want to call. (See Storing One-Touch
numbers on page 5-1.)
Note
■
FAX-2820, FAX-2910 and FAX-2920 only:
To dial One-Touch numbers11 to 20, hold
down Shift as you press the
One-Touch key.
■
Shift is not available for MFC-7220 and
MFC-7225N.
Setup Send
MFC-7220 and
MFC-7225N FAX-2820, FAX-2910
and FAX-2920