Sharp MX-B201D - Manual (Page 18)

17
3 Chapter 3
MAKING COPIES
This chapter explains basic copying functions.
NORMAL COPYING
Using the document glass
1 Open the document cover/RSPF, and place the original face
down on the document glass.
[How to place the original]
Align the original with the original scale and the
centring (
) mark.
2 Gently close the document cover/RSPF.
3 Select the number of copies and other copy settings, and then
press the [START] key (
).
Copying books or originals with folds or creases
Press down on the document cover/RSPF while
copying as shown. If the document cover/RSPF is
not completely closed, shadows may appear on the
copy or it may be fuzzy. Straight originals with folds
or creases well before placing.
• The document glass can scan up to a A4 original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the START GUIDE.
• To stop copying in the middle of a run, press the [CLEAR] key ( ).
• For the copy settings, see pages 20 through 33.
mark
Original scale