Sharp GS-XP12FGR - GU-X12FGR - Manual (Page 12)

E-10
ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre levers as shown in the dia-
gram and adjust the air flow di-
rection.
Press the SWING button.
• The vertical adjustment louvre for upper outlet
will change its angle continuously.
Press the SWING button again when the
vertical adjustment louvre for upper outlet
is at the desired position.
• The louvre will stop moving within the range
shown in the diagram.
• The adjusted position will be memorized and will
be automatically set to the same position when
operated the next time.
NOTE:
The vertical adjustment louvre for lower outlet is
automatically set and cannot be changed.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the
remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode
for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to “SOFT(
)” for an extended period of time.
Condensation may form on the louvres.
HORIZONTAL AIR FLOW DIRECTION
1
2
SWING
FAN
MODE
SET/C
1h
1
2
Louvre levers