Document Outline

• Contents
• Chapter 1 General Information
  • 1.1 Introduction
  • 1.2 Specifications
    • 1.2.1 System Kernel
    • 1.2.2 I/O Ports
    • 1.2.3 Safety and Environment
  • 1.3 LCD Specifications
  • 1.4 Touchscreen Specifications
  • 1.5 Power
  • 1.6 I/O Ports Arrangement
    • Figure 1.1: I/O Port Arrangement
  • 1.7 Panel Mounting
    • Figure 1.2: Panel Mounting
  • 1.8 Dimensions and Cutout
    • Figure 1.3: Dimensions
• Chapter 2 System Setup
  • Figure 2.1: Unpack the Package
  • Figure 2.2: Install CompactFlash Memory Card
  • Figure 2.3: Power Connector and Power Lines
  • Figure 2.4: Power Receptor & Button Pin Assignment
  • Figure 2.5: Touchscreen Icon
  • Figure 2.6: Touchscreen Calibration
• Chapter 3 System Engine
  • Mainboard Connectors & Jumper Settings
  • Figure 3.1: Main Board Connectors - 1
  • Figure 3.2: Main Board Connectors - 2
• Chapter 4 Software Configuration
  • 4.1 VGA Driver Installation
    • Figure 4.1: Device Manager
    • Figure 4.2: Update Driver
    • Figure 4.3: Update Wizard-1
    • Figure 4.4: Update Wizard-2
    • Figure 4.5: Update Wizard-3
    • Figure 4.6: Update Wizard-4
    • Figure 4.7: Update Wizard-5
    • Figure 4.8: Update Wizard-6
    • Figure 4.9: Driver Installation Complete
  • 4.2 Advantech COM Driver Install
    • Figure 4.10: PCI_ICOM Setup
    • Figure 4.11: PCI ICOM Installation - 1
    • Figure 4.12: PCI ICOM Installation - 2
    • Figure 4.13: Device Manager Screen
    • Figure 4.14: Update Driver - 1
    • Figure 4.15: Update Driver - 2
    • Figure 4.16: Update Driver - 3
    • Figure 4.17: Slave Bridge Installation Complete
    • Figure 4.18: PCI-1602 Device Manager
    • Figure 4.19: PCI Serial port Device Manager
    • Figure 4.20: Update Driver - 1
    • Figure 4.21: Update Driver - 2
    • Figure 4.22: Update Driver - 3
    • Figure 4.23: PCI-1602 Master Installation
    • Figure 4.24: PCI Serial Port Installation - 1
    • Figure 4.25: PCI Serial Port Installation - 2
    • Figure 4.26: PCI Serial Port Installation - 3
    • Figure 4.27: PCI Serial Port Installation - 4
    • Figure 4.28: PCI Serial Port Installation - 5
    • Figure 4.29: PCI Serial Port Installation - 6
    • Figure 4.30: PCI Serial Port Installation - 7
    • Figure 4.31: Installation Complete
  • 4.3 Entertainment Encryption/Decryption Driver
    • Figure 4.32: Device Manager
    • Figure 4.33: Install Wizard - 1
    • Figure 4.34: Install Wizard - 2
    • Figure 4.35: Install Wizard - 3
    • Figure 4.36: Driver Installation Complete
• Chapter 5 Features in Windows XP Embedded
  • 5.1 EWF
  • 5.2 HORM
  • 5.3 Advantech Utilities
    • 5.3.1 Version Information
    • 5.3.2 OSLock and OSUnLock
    • 5.3.3 HORM
• Appendix A Serial Port Settings
  • A.1 COM1/ COM2/ COM3 Connector Definition
  • A.2 COM4 Setting
• Appendix B Watchdog Timer Programming
  • B.1 Overview
  • B.2 Watchdog Timer Programming
    • Figure B.1: Watchdog timer programming procedure
    • Watchdog Timer Registers
  • B.3 Example Programs
• Appendix C Watchdog Timer Programming on WinCE
  • C.1 DeviceIOControl
    • C.1.1 Parameters
  • C.2 How to Use the Control Code
    • C.2.1 IOCTL _WDT_ENABLE:
    • C.2.2 IOCTL _WDT_DISABLE:
    • C.2.3 IOCTL_WDT_STROBE:
    • C.2.4 IOCTL_WDT_GETTIMEOUT:
    • C.2.5 IOCTL_WDT_SETTIMEOUT:
    • C.2.6 IOCTL_WDT_REBOOT:
  • C.3 Examples
• Appendix D Accessory Kit Assembly Procedure
  • D.1 CompactFlash to IDE Transfer Kit
    • Figure D.1: Adapter Board and IDE Cable
    • Figure D.2: Connecting the Adapter Board
    • Figure D.3: CompactFlash Slot
    • Figure D.4: Insert the Adapter Board into the CF slot
    • Figure D.5: Inserted Adapter Board
    • Figure D.6: Connect the CD-ROM via the IDE Cable
    • Figure D.7: Plugging in the CD-ROM Drive
• Appendix E HDD Kit Assembly
  • E.1 Ruggedized HDD Kit
    • Figure E.1: Removing the HDD cover
    • Figure E.2: Required Parts
    • Figure E.3: Opening the Top
    • Figure E.4: Fastening the bracket
    • Figure E.5: Connectting the FPC with the HDD
    • Figure E.6: Placing the HDD insulator on the HDD
    • Figure E.7: Reverse side of the HDD holder
    • Figure E.8: Fastening the HDD holder
    • Figure E.9: Mounting the cushions - 1
    • Figure E.10: Mounting the cushions - 2
    • Figure E.11: Placing the HDD holder - 1
    • Figure E.12: Placing the HDD holder - 2
    • Figure E.13: Fastening the HDD holder
  • E.2 Internal HDD Kit Assembly
    • Figure E.14: Removing the HDD cover
    • Figure E.15: Placing a screw into its rubber casing
    • Figure E.16: Mounting the rubber casings
    • Figure E.17: Connecting the FPC cable
    • Figure E.18: Inserting the HDD
    • Figure E.19: Laying in the HDD insulator
    • Figure E.20: Placing the cover back into position
    • Figure E.21: Re-fastening the cover - 1
    • Figure E.22: Re-fastening the cover - 2
    • Figure E.23: Fastening the PCI/104 bracket - 1
    • Figure E.24: Fastening the PCI/104 bracket - 2
• Appendix F Touchscreen Installation & Configuration
  • F.1 Driver Installation
    • Figure F.1: Setup.exe
    • Figure F.2: Install Wizard - 1
    • Figure F.3: Install Wizard - 2
    • Figure F.4: Install Wizard - 3
  • F.2 Uninstall the Driver
    • Figure F.5: Uninstall -1
    • Figure F.6: Uninstall -2
  • F.3 Touchscreen Calibration
    • Figure F.7: Standard Calibration -1
    • Figure F.8: Standard Calibration -2
    • Figure F.9: Standard Calibration -3
    • Figure F.10: Advanced Calibration -1
    • Figure F.11: Advanced Calibration -2
    • Figure F.12: Plot Calibration Data
    • Figure F.13: Draw
    • Figure F.14: Clear Screen
    • Figure F.15: Option
• Appendix G Fuse Specifications
  • G.1 Fuse Specifications
  • G.2 Fuse Replacement
    • Figure G.1: Fuse Replacement