Blue Rhino ENDLESS SUMMER 235000 User Manual
Page 4
®
Outdoor Patio Heater Model No. 235000
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
Assembly Instructions
1
DO NOT RETURN PRODUCT TO STORE.
For assistance call
1.800.762.1142 toll free. Please have your
owner’s manual and serial number available for reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in step Operations Section)
• (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external
threaded valve connection (4-5 gallon size)
Note: You must follow all steps to properly assemble heater.
Typical assembly: approximately 1 (one) hour.
3
Attach weight plate
Note: If you plan to anchor your heater permanently, be sure to line up two outer
holes in base with those in weight plate so that your anchor bolt will pass through
both holes.
E
x 1
G
x 1
J
x 1
4
Attach Platform
TIP: To tighten use a 7/16” wrench on Bolt and a 7/16” socket wrench on Nut.
D
x 6
F
x 6
I
x 6
2
Attach Legs and Tank Retention Chain
D
x 6
F
x 6
I
x 6