Black Box LTD8 - Manual (Page 11)

Page 11 724-746-5500 | blackbox.com
Chapter 4: Configuration and Setup
Step 6. Wrap the plug wire around the brick. Leave at least 7" of extra cable if the
divider will be inserted into the bottom shelf, or at least 21" of extra cable if the
divider will be inserted into the top shelf.
Lower shelf: 7"
Upper shelf: 21"
Figure 4-8. Wrap the remaining electrical cable around the power brick.
Step 7. Hold the brick and cords in place by strapping them down using a zip tie or a
hook-and-loop tie.
Strap
Figure 4-9. Strap the brick and cord in place using a zip tie or
hook-and-loop tie (not included).
LTD5