Bissell 6800 - Manual (Page 7)

7
Located at the top rear side of the vacuum cleaner, there is a
nozzle support that can be used to park the nozzle during pauses
in cleaning.
For easy storage and transportation, there is a nozzle support on
the back of the vacuum cleaner in the vertical position.
Storage Position
Troubleshooting
Motor Does Not Start.
Possible Causes Remedies
No power supply Check cord, plug and socket.
Decreasing Suction Or No Suction.
Possible Causes Remedies
Filter, Floor Nozzle, Suction Hose or Extension Wand Remove each part and check for blockages.
is blocked.
Dust Bag is full. Replace with new Dust Bag.
Closure tab on Dust Bag may be covering Make sure closure tab on Dust Bag is properly
the Inlet Suction. folded back.
Cord Does Not Rewind Fully.
Possible Cause Remedies
Check that the cord is not twisted or wound unevenly. Gently pull the cord out and push down on the
cord rewind.
You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our
website. To locate a retailer near you, or to place an order using Visa, Mastercard, Discover or American Express, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or visit our website - www.bissell.com
Item Part No. Part Name
1 203-2022 Dusting Brush/Crevice Tool
2 203-2017 Floor Nozzle
3 203-2021 Suction Hose/Handle
4 203-2023 Extension Wand
5 203-2071 Telescoping Extension
Wand - Chrome
6 203-2019 Tool Storage Clip
7 203-2024 Post-Motor Filter
8 203-2027 Pre-Motor Filter
9 203-2026 Replacement Bag (5 pack)
1 1
1 1
2 2
Replacement Parts
3 3
1 2 3
5 4 6
7 8 9
1 1
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from outlet before
servicing.