Spray arms, Pump – Bosch 9000 035918 (8406 0) User Manual

Page 22

Advertising
background image

en

22

Spray arms

Lime and remnants of food in the washing
water can block the nozzles in the spray
arms

22

and

23

and the arm

mountings .

Inspect the nozzles in the spray arms
for blocked holes due to remnants of
food.
If necessary, pull the lower arm

23

upwards and lift it off.
Unscrew the upper spray arm

22

.

Clean both spray arms under running
water.
Refit the spray arms. Ensure that the
lower arm has locked into place and the
upper one is screwed tight.

0

1

2

3

Spray arms

Pump *
*

on applicable models

Larger remnants of food that have not
been trapped by the filters and have been
left in the water can cause a blockage in
the pump. The water is no longer pumped
out of the dishwasher and it can be seen
covering the filter.
Proceed as follows:

Ladle out as much water as possible.
Remove the filters

25

.

Undo the screw in the cover (Torx T 20)
and remove the cover.
Inspect the inside and remove any
obstructions that you find.
Re-insert the cover and screw down.
Re-insert the filters and screw down.

Torx T20

2

1

Advertising