Neff D66B21S0GB - Manual (Page 12)

12
Installation
Preparing for installation
Caution!
Ensure that there are no electric wires, gas or water pipes in the
area where holes are to be made.
1. Mark a vertical centre line on the wall from the ceiling to the
lower edge of the extractor hood.
2. Mark the positions for the screws and the contour of the
attachment area.
3. Drill 8 mm Ø holes to a depth of 80 mm and press the wall
plugs flush with the wall. ¨
4. Screw on the fixing bracket for the flue duct. ©
5. Screw in 2 securing screws with washers to approx. 5 mm. ª
Installation
1. Attaching and aligning the appliance. ¨
2. Mark the hole for the safety screw. ©
3. Remove the appliance once more. ª







 
[
   ! !
$
$
$
$
$
$
$
%
%
&
%
&
$