Neff C47D22N3GB - Manual (Page 8)

8
Cooking compartment
The cooking compartment has four shelf positions. The shelf
positions are counted from the bottom up.
Caution!
■
Do not place anything on the cooking compartment floor. Do
not cover it with aluminium foil. A build-up of heat could
damage the appliance.
The cooking compartment floor and the evaporator dish must
always be kept clear. Always place ovenware in a perforated
cooking container or on a wire rack.
■
Do not slide any accessories between the shelf positions, or
they may tip.
Optional accessories
You can obtain further accessories from specialist retailers:
Before using for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
■
Setting the clock
■
Setting the water hardness range
■
Starting the appliance for the first time
■
Cleaning the accessories before use
Setting the clock
Note: When you press the KJ clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
1. Briefly press the KJ clock function button to go to the
setting mode.
The
KJ and 3 symbols light up. ‚ƒ : ‹‹ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the KJ clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Setting the water hardness range
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or uncarbonated
mineral water.
The water hardness "medium" (
™†ƒ ) is the default setting.
Change the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
Notes
■
If your water is very hard, we recommend that you use
softened water.
■
If you use only softened water, you can set your appliance to
the "softened" water hardness range.
■
If you use mineral water, set the water hardness to hard.
■
If you use mineral water, you must only use non-carbonated
mineral water (see section "Filling and emptying the water
tank").
You can change the water hardness range in the basic settings
when the appliance is switched on.
1. If required, turn the operating mode selector to the
Û position.
2. Press and hold the ± information button until ™‚ ‹ appears
in the temperature display.
3. Briefly press the ± information button repeatedly until ™†ƒ
appears in the temperature display (water
hardness "medium").
4. Use the temperature selector to set the water hardness.




(YDSRUDWRU GLVK 5DLOV IRU
DFFHVVRULHV
7DQN UHFHVV
ZLWK ZDWHU WDQN
Accessories Order no.
Cooking container, solid, GN Z , 40 mm
deep
Z1683X3
Cooking container, perforated, GN Z ,
40 mm deep
Z1682X3
Cooking container, solid, GN Z , 28 mm
deep (baking tray)
Z1673X3
Cooking container, solid, GN Y , 40 mm
deep
Z1663X0
Cooking container, perforated, GN Y ,
40 mm deep
Z1662X0
Porcelain cooking container, solid, GN Z Z1685X0
Porcelain cooking container, solid, GN Y Z1665X0
Wire rack Z1664X3
Cleaning sponge 643 254
Descaler 311 138
Honeycomb microfibre cloth 460 770