MTD OEM-190-821 - Manual (Page 6)

6
SECTION 4: TO THE OWNER
Model 821 Triple Rear Bagger Kit is a grass collection system designed for use on FastAttach
™
Compatible
Garden Tractors equipped with a 46-inch cutting deck only.
The instructions in this manual are divided into sections. Carefully read all sections and study the illustrations
to ensure proper installation and usage of this attachment. Read and observe all WARNING and CAUTION
statements. They are included to provide for the protection of the equipment installer and user, and to ensure
the prolonged service life of the equipment.
NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in
the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.
SECTION 5: CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below and shown in Figure 4. Hardware part number are shown in parentheses.
One Chute Tube
One Discharge Chute Assembly
One Extension Tube
One set of Blades Three Grass Bag Assemblies
One Grass Catcher Cover Assembly
One Bracket Assembly w/ Clevis Pin (711-0309A)
& Hairpin Clip (714-0117) in place
Figure 4
Chute Tube
Discharge Chute
Assembly
Bag Assemblies
Cover Assembly
Bracket Assembly
Support Tube
(attached to cover assembly)
Blades
Clevis Pin
Hairpin Clip
Extension Tube