Press power to turn on washer, Add fabric softener to dispenser (if desired), Add he detergent – Whirlpool WFL98HEBU User Manual
Page 10: Select cycle
10
Add liquid chlorine bleach to the bleach compartment.
Do not overfill, dilute, or use more than 2/3 cup (165 mL).
Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach.
n
Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
n
Do not fill beyond the “MAX” level. Overfilling could cause
garment damage.
n
Add single-dose laundry packet, Oxi product, or color-safe
bleach to the washer drum before loading the clothes. Do not
add products to dispensers.
6.
Add liquid chlorine bleach
to dispenser (if desired)
7.
Press POWER to turn on washer
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer’s
directions for correct amount of fabric softener based on
your load size.
Fabric softener is always dispensed in the last rinse, even
if Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than
1/4 cup (60 mL) of fabric softener. Do not fill past the MAX
line. Overfilling dispenser will cause fabric softener to
immediately dispense into washer.
n
Do not spill or drip any fabric softener onto the clothes.
n
Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
5.
Add fabric softener to dispenser
(if desired)
Slowly close the Precision Dispense drawer. Make sure the drawer
is closed completely, then press POWER to turn on the washer.
Liquid fabric
softener
compartment
Liquid chlorine
bleach
compartment
Select detergent dispenser, based on type of HE detergent
used (either liquid or powdered). See “Using the Precision
Dispense Dispenser” instructions on how to use the
dispenser.
4.
Add HE detergent
Single load
powdered
HE detergent
Precision
Dispense Ultra
cartridge
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, or color-safe bleach to dispensers. They will not
dispense correctly.
8.
Select CYCLE
Turn cycle knob to choose your wash cycle. The cycle name
and options will appear in the display.
See “Cycle Guide” for details on cycle features, or press More
Info. Not all options and settings are available on all cycles.
When selecting My Cycle or Specialty Cycles, refer to the
LCD display for additional options and settings. For more
information on using My Cycle and Specialty Cycles,
see “My Cycle and Specialty Cycles”.