Bolens 12226 - Manual (Page 22)

22 Section 5: Maintenance
Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to come to
a complete stop, remove ignition key on electric start models, disconnect spark plug wire and move wire
away from spark plug.
Failure to follow these instructions can result in serious personal injury or property damage.
WARNING
TILLER ATTACHMENTS
The attachments listed below are available for your tiller. The information is the most current at the time this manual was printed.
Contact your authorized dealer or the Factory for current information.
HILLER/FURROWER
The furrower blade attaches to the back of the depth regulator assembly and is used to create rows, trenches and ditches up to 8"
deep, depending on soil conditions. The two hiller wings attach to the sides of the furrower blade and are used to make hilled rows
and raised bed gardens.
ROW MARKER
The row marker attaches to the hiller/furrower attachment and is used to scratch lines in the seedbed for laying out furrows,
trenches, raised beds, etc. (eliminates the need for stakes, string and measuring tape). The row marker is adjustable in length from
28" to 49-3/4", allowing you to vary the width of the marked rows, as required.