BT Diverse 5250 - Manual (Page 40)

BT Diverse 5250 ~ 5th Edition ~ 20th May ’03 ~ 5187
38
To change the base
station PIN
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Base Settings .
Press the OK options button.
Press the DOWN navigation
button until the display shows
System PIN .
Press the OK options button.
Enter the current PIN
(original setting =
0000 ).
Press the OK options button.
Enter the new PIN.
Press the OK options button.
Repeat the new PIN to confirm.
Press the OK options button to
save the new PIN.
Press the RED PHONE button
until you reach the idle display.
To reset the base
You can restore a base station
to its factory settings. Resetting
the base will not affect the
system PIN or handset
registration.
Press the MENU options button.
Press the DOWN navigation
button until the display shows
Base Settings .
Press the OK options button.
Press the DOWN navigation
button until the display shows
Base Reset .
Press the OK options button.
Enter the current PIN
(original setting =
0000 .)
Press the OK options button.
Display shows reset to
default?
Press the OK options button to
confirm reset.
The settings after a reset will be:
Calls list deleted
Dialling mode tone
Flash time 100ms
Prefix deleted
Pause after prefix 3secs
SMS provider Pre-set number
number switched on
SMS incoming
and outgoing lists
deleted
Voice dialling deleted
Press the RED PHONE button
until you reach the idle display.
Note
The ✔ icon beside Repeater mode
shows that it is ON.
OK
OK
OK
OK
OK
OK
OK
MENU
B
ASE
SETTINGS
MENU
OK
OK
BT Diverse Helpline – 08457 908 070