BT 5350 - Manual (Page 45)

BT Diverse 5350 ~ 5th Edition ~ 19th June ’03 ~ 5193
43
BT Diverse Helpline – 08457 908 070
Alarm clock
You can use your handset as an alarm
clock. You must set the date and time
before the alarm will work. The alarm will
ring daily until the setting is turned off.
To set the alarm
Press the ALARM CLOCK
options button.
Display shows Alarm Clock .
Press the OK options button.
Display shows Enter alarm
time and the first digit of the
time will be flashing.
Enter the time you want the
alarm to go off at.
Press the OK options button.
Use the UP/DOWN navigation
button to select am/pm if in 12
hour mode.
Press the OK options button.
Display shows Entry Saved .
Press the RED PHONE button
until you reach the idle display.
The icon will be displayed
in the top right of the handset
display to indicate that the
alarm has been set.
To stop the alarm ringing
When the alarm goes off it
sounds like an incoming call
and lasts for about 30 seconds.
The display will also show
< < < Alarm Clock > > > flashing.
Press any button to switch the
alarm off.
To cancel the alarm setting
The alarm will ring daily until
you cancel the setting.
Press the ALARM CLOCK
options button.
Display shows Alarm Clock
with a above the OK
options button.
Press the OK options button.
You will hear a tone and the
will disappear. Press the
RED PHONE button until you
reach the idle display.
The icon will have
disappeared from the top of
the handset display.
Note
The alarm will only sound if the
handset is in idle mode. The alarm
will not sound if the Room Monitor
function is being used.
OK
OK
OK
OK
HANDSET
SETTINGS