Bissell V. (VERSUS) 21R9 - Manual (Page 5)

5
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Quick and easy assembly
1. To assemble the handle connect all three
handle sections by connecting the base of
one section to the top of another. Repeat with
remaining two sections.
2. Attach the handle grip by connecting handle
grip to assembled handle.
3. Connect assembled handle and grip to base of
unit by inserting handle into base until it snaps
into place.
Power switch
Power button is red and located on back left
hand side of unit.
To turn unit on, press red power button once
with foot.
To turn unit off, press red power button once
more with foot.
How to use your cordless vacuum
The cordless bare floor vacuum is a quick and easy
way to clean your bare floors and low pile carpets.
1. Detent by holding base steady with one foot
and tip handle back.
2. Gently tap red power button on base with
your foot to turn unit on.
3. Clean along edges, in corners, and around
tables and chairs by lining unit up along
surface you want to clean.
4. When finished cleaning, tap red power button
on base with your foot to turn unit off.
5. To properly store, return handle to
upright position.
6. Recharge if needed.
Note: The cordless bare floor vacuum has a 360
degree swivel handle. To store properly, make sure
handle has rotated back to its original position.
A
ssembly
O
peration
Power
Button
1.
1. 2.
6.
ug110-4038_21R9_608.indd 5 8/12/08 10:54:38 AM