Bissell 6100 - Manual (Page 14)

14
w w w . b i s s e l l . c o m
M
aintenance and care
Brush reset
If something becomes lodged in the foot and
the brush shuts off, turn the cleaner off and
unplug from the electrical outlet. Remove the
obstruction. the brush will automatically reset
when the cleaner is plugged in and turned
back on.
Brush maintenance
the rotating brush should be checked regularly
for accumulating debris that might reduce the
cleaning performance of your vacuum.
1. Unplug cleaner from electrical outlet.
2. Recline the handle and turn your cleaner
over so the bottom side is up.
3. Carefully cut away any visible hair, fibers
or debris from the brush roll.
Do not attempt to disassemble the vacuum foot
or to remove the brush roll. If you feel it needs
to be checked or replaced, have your cleaner
serviced.
Belt maintenance
the brush belt is designed to last the useful life
of the cleaner when used according to all
instructions in this user's guide under normal
household conditions. If you feel that it needs to be
checked or replaced, have your cleaner serviced.
Do not attempt to disassemble the
vacuum foot or to change the belt.
caUtIon:
to reduce the risk of injury
from moving parts, turn
power switch off and
disconnect power plug
from electrical outlet.
3