Beko WM 6155 W - Manual (Page 2)

3
Switch on
Attention!
Before using the machine check the following:
• Have you closed the front door?
• Is the tap open?
• Is the drain hose placed and secured properly?
• Is power connected?
• Ensuring maximum load is not exceeded (see page 13)
When you press the On/Off button, your machine is ready to select
the desired programme. To switch the machine off, repress the On/Off
button.
Washing can only be started when the “Start/Pause/Cancel” button is
pressed.
Program operation.
During the machine’s operation, the indicator lights on the programme
follower will be on accordingly.
If fabric softener is added in the softener compartment, it will be used in
the last rinse cycle.
4
Select a programme
Select the programme after referring to the programme descriptions and
table below.
Warning! Always switch on the machine before selecting your wash
programme.
Turn the programme selection knob to select the desired
programme with washing temperature and spin speed at the same time.