Bissell 83V5 - Manual (Page 14)

w w w . b i s s e l l . c o m
O
perations
14
Hard Floor Cleaning
Your Healthy Home Fresh Clean may
have included a hard floor tool and 2X
Hard Floor Solutions. The hard floor tool
provides effective cleaning for linoleum,
vinyl, and tile floors.
Caution: Do not use on unsealed
hardwood floors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE: Prior to filling with formula
and water be sure all carpet cleaning
formula is thoroughly rinsed from the
2-in-1 water tank.
2. Fill BISSELL Hard Floor Solutions to the
indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3. Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom of
the machine by hooking it into the nozzle
and swinging it down until it clicks into
place.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back.Caution: Do Not Overwet.
9. Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer
to the Maintenance and care section on
page 15 for machine clean up and
storage instructions.
4.