Blaupunkt ACD 9430 - Manual (Page 10)

19
ACD 9430
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
S
KA
F
RANÇAI
S
Programming with DSC
The car radio’s DSC function (Direct Soft-
ware Control) allows you to adjust the seek
tuning sensitivity for FM and the volume of
ARI traffic messages.
Adjusting the seek tuning sensitivity:
• Press the lo•m 5 button longer than
8 secs. The display gives you “lo” and a
number between 1 and 3.
• Adjust the sensitivity using the rocker
switch < >
7 .
1 = ^ high sensitivity
3 = ^ normal sensitivity
To store the adjustment,
• press th lo•m button once again.
For setting the volume of ARI traffic messa-
ges,
• press the ARI button 4 longer than
8 secs. The display indicates “L” and a
number between 1 and 9.
• Use the rocker switch < > 7 to adjust
the volume of traffic messages
1
= ^ low volume
9 = ^ high volume
To store the adjustment,
• press the ARI button once again.
Appendix
Technical Data
Amplifier:
Output power:
4 x 8 watts acc. to DIN
45324/3.1
FM:
Frequency
response:
50 - 16 000 Hz (-3dB)
CD:
Frequency
response:
20 - 20 000 Hz (-3 dB)
Preamp-Out: Output impedance
150
Ω
What to Do If Your Car Stereo
Needs Service?
Whenever your car radio fails to operate
properly and therefore requiring repair by an
authorized service centre, please do not for-
get to take the car radio passport along with
you.
Modifications reserved!