Bissell 44M3 - Manual (Page 9)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
O
perations
tools
attach desired tool to hose for above
floor cleaning or hard to reach areas.
1. Raise handle to upright position.
2.
Grasp the Quick Reach handle and lift hose
wand to separate from suction intake
opening.
3. Attach tools by firmly pushing onto
vacuum hose or extension wand.
Crevice tool
Use in tight narrow spaces.
Combination dusting
brush/upholstery tool
Two types of cleaning tools are included
in one attachment. Rotate for desired tool.
Use brush side to dust furniture, blinds,
books, lamps, shelves and baseboards.
Use the upholstery tool on cushions, drap-
eries and fabrics.
Extension wand
Use with desired attachment for a longer reach.
pet contour tool ®
(select models only)
Use to reach into corners and edges on stairs
as well as armrests and other curved surfaces.
The tool can be flipped to use in any direction.
pet turbobrush ® tool
67F8 series includes Pet TurboEraser™
Tool. Use rotating brush action for small
flat areas such as cushions and beds.
note: press gently down and pull
towards you in a raking motion. too
much pressure will cause the brush
to stop rotating.
Tip:
Hair, string and small
objects can block the
vacuum hose or
tools. Check them
regularly for
obstructions.
CAUTION:
The rotating floor brush continues to rotate while tools are
in use. To reduce the risk of injury from moving parts, always
move the cleaner with the carrying handle at the back of the
cleaner. Always place vacuum cleaner on floor with handle in
upright position and adjust to the highest height setting when
using tools. Never place your fingers under the cleaner when it
is running. Never place powerfoot on furniture or uneven sur-
faces. Do not place vacuum cleaner close enough to objects to
pull them into rotating brush.
notice:
These tools are designed to
remove pet hair from upholstered
or carpeted surfaces. They should
not be used on pets.