Bernina Happy Voyager - Manual (Page 36)

Happy Voyager
Positioning the Design in the Hoop/Creating Hoops 14
Round Type Hoops
Select Class 1 , press SET.
Press, SET to enter the Size area.
Change the number to represent the hoop size
you wish to use for a Round Hoop.
Press, SET to save your change and ESC to exit
the submenu.
Note: Remember the largest round hoop to fit the
HV machine is 210mm.
Rectangle Type Hoops
Select Class 2 , press SET.
Press, SET to enter the Size Y area.
Change the numbers to represent the height size
you wish for the hoop. Press SET to accept.
Press, SET to enter the Size X area.
Change the numbers to represent the Length size
you wish for the hoop. Press SET to accep
Note:
Equal values in the Y and X filed represent a
square hoop, uneven values represent a rectan-
gular hoop. Remember the largest Square hoop
to fit the HV machine is Y = 320mm and X =
320mm
Select ESC to exit the submenu.
Once the hoop is created. Select the hoop and
position the design in the hoop the same as de-
scribed earlier.